A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Honda CR-V Bosch 0265235304 0265950676
Vendors's code: 0265235304
Product code: 0265950676
Barcode:
Code 39:
ISBN:
650,41 zł
Price
650,41 zł
800,00 zł
Price
800,00 zł
Ask about the product
ABS pump Honda CR-V Bosch 0265235304 0265950676
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 0265235304 on an ABS pump mean?
Used original ABS module with number 0265235304 for Honda CR-V. Confirm compatibility with the number from your original pump.
Used Honda CR-V ABS pump with number 0265235304
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Honda CR-V cars. You will find number 0265235304 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Honda CR-V model.
Numbers to compare
You will find the numbers on the labels, while catalogues list them as a single string:
- 0 265 235 304 (catalogue format: 0265235304), hydraulic block manufacturer's number,
- 0 265 950 676 (catalogue format: 0265950676), control unit number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What can point to an ABS pump failure
- the ABS warning light comes on after the engine is started and stays on,
- the ABS stops working, although basic braking usually remains functional,
- the ABS warning light comes on together with the stability control warning light,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Does a lit ABS warning light always mean a faulty pump? |
|---|
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
