A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Jeep ATE P68028215AB 28526049003
Vendors's code: P68028215AB
Product code: 28526049003
Barcode:
Code 39:
ISBN:
€365.85
Price
€365.85
€450.00
Price
€450.00
Ask about the product
ABS pump and control module Jeep ATE P68028215AB 28526049003
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
P68028215AB: the AB-suffix variant for a Jeep
A used, working, original ABS pump with control module. We do not state the model. Alongside the OEM number there is an ATE number.
ABS unit for a Jeep - number P68028215AB, ATE 28.5260-4900.3
Jeep, ABS unit, two numbers. The first is part number (OEM) P68028215AB. The second is ATE number 28.5260-4900.3. We do not state the model, because the choice is based on the numbers. We also list a variant with the AD suffix. This one has the AB suffix and a different ATE number. The part is used, working and original.
Numbers of the AB variant
- P68028215AB - part number (OEM): P68028215AB
- 28526049003 - ATE number: 28.5260-4900.3
The two letters at the end of the OEM number distinguish the variants. Check them first. Then compare the ATE number, which also differs from the AD variant. We do not split the numbers into roles.
When something is wrong with the car
Symptoms that make it worth looking at the numbers:
- ABS reports a pressure sensor fault,
- the ABS warning light comes on after a few minutes of driving,
- the fault comes back after an earlier repair of the system,
- diagnostics show a control module and pump fault at the same time.
If the fault returns after a repair, write down the codes before and after clearing them. Compare them. Check the wheel speed sensor wiring and the unit's earth. After fitting the replacement, bleed the brake system.
Questions about the AB variant
| How does it differ from P68028215AD? |
|---|
| In the OEM number suffix and the ATE number. Here it is AB and 28.5260-4900.3. |
| Can I order if my part has the AD suffix? |
| Better not. Choose the listing with the AD suffix or write to us. |
| How do I write the ATE number as a single string? |
| 28526049003. It is the same number as 28.5260-4900.3. |
| Do you know the Jeep model? |
| We do not state the model. The numbers are what count. |
Check the number suffix on your part and write to us. We will confirm the variant.
