Skip to main content
In English +48 792 797 344 Polski +48 501 409 435 +48 32 201 72 96 En Español +34 63 727 27 85 contact@auto24parts.com
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Wishlist
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Jeep Fiat 52149833
  • ABS pump and control module Jeep Fiat 52149833
  • ABS pump and control module Jeep Fiat 52149833 - photo 2
  • Part Type ABS pump with control module
  • Vehicle Make and Model Jeep Fiat
  • OEM Part Number 52149833
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
Trw
with VAT without VAT
Price €225.00
PLN GBP EUR USD
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price

PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Jeep Fiat
  • OEM Part Number 52149833
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

Jeep or Fiat? Number 52149833 settles it

The listing title names two makes: Jeep and Fiat. The ABS pump with control module is used, working and original. It has one part number (OEM).

Go to full description

Jeep / Fiat - ABS pump with control module, number 52149833

We describe this listing with two makes: Jeep and Fiat. We do not state the model. Nor do we claim that the part will suit every car of these makes. The choice is decided by a single part number (OEM), given below. The unit is used, working and original.

Number to compare

  • 52149833 - part number (OEM): 52149833

With a single number, things are simple. Find the sticker or print on the housing of your old part. Clean it and read the digits. Compare them with the number on the list. If even one digit differs, write to us.

Typical signs of a fault

Symptoms that make it worth checking the unit:

  • the ABS warning light comes on at every start,
  • the fault memory shows a module fault,
  • the pump does not start during the test,
  • ABS stops working after a longer drive.

Start the diagnosis by reading the codes. Then inspect the wheel speed sensors and the fuses. Plan a replacement only once it is clear that the unit is at fault. After fitting, the system has to be bled.

Short answers

Is the part for both Jeep and Fiat?
Both makes appear in the listing title. Selection, however, is based on the part number.
Is there a second number?
No. The listing has one part number (OEM).
My number has different final digits. What next?
Write to us. We will check whether we have a unit with your number.
Is the car model known?
We do not state the model.

Copy the number from your part and send it to us. We will reply once we have compared it.

Latest Articles
See All

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more

  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more

  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more

  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more

  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more

  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more