A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Kia Rio 0K30C437A0 AC04500151
Vendors's code: AC04500151
Product code: 0K30C437A0
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump Kia Rio 0K30C437A0 AC04500151
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 0K30C437A0 fits your Kia Rio
Used ABS pump with control unit, number 0K30C437A0, inspected before sale. Matched by the numbers on the block and sticker.
Is ABS pump 0K30C437A0 the right part for your Kia?
This is a used original ABS pump with a control unit for Kia Rio cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 0K30C437A0, and the other numbers from the labels are listed below. According to the listing, the pump comes from the Kia Rio model.
Numbers to compare
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 0K30C437A0, original Kia number,
- AC04500151, additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What ABS problems can point to
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS warning light comes on together with the stability control warning light.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| What is the difference between numbers 0K30C437A0 and AC04500151? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
