A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Lancia Kappa Bosch 0265216452 46461041 0273004105
Vendors's code: 46461041
Product code: 0265216452
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Lancia Kappa Bosch 0265216452 46461041 0273004105
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.52
-
shipping
(Poland)
from
$30.52
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Bosch ABS pump for the Lancia Kappa - which numbers should you compare?
A used, working, original Bosch ABS unit for the Lancia Kappa. Numbers: 0265216452, 46461041 and 0273004105. Matching is done by part numbers.
Lancia Kappa - Bosch ABS pump and control unit 0265216452
This is a Bosch ABS unit from a Lancia Kappa. The numbers 0 265 216 452 and 46461041 are stamped on the hydraulic block, and the control unit housing has a label marked BOSCH. The control unit is listed under the number 0 273 004 105. The unit is used, working and original.
Numbers in the listing
- 0265216452 - Bosch number stamped on the hydraulic block: 0 265 216 452
- 46461041 - part number (OEM) stamped on the hydraulic block: 46461041
- 0273004105 - Bosch number of the control unit given in the listing: 0 273 004 105
The Bosch numbers begin with 0265 (pump block) and 0273 (control unit), and the third number is 46461041. When comparing with the part removed from your car, check all three.
Symptoms that call for checking the ABS unit
An ABS unit is usually suspected when:
- the ABS warning light is on,
- the control unit reports an internal fault,
- the ABS pump switches on at unusual moments,
- diagnostics cannot connect to the module.
Before buying, rule out simpler causes: a faulty wheel speed sensor, a poor contact in a connector, a weak battery. After fitting, the brake system must be bled. It is also worth asking your garage whether the module needs configuring.
Frequently asked questions
| Is this unit from a Lancia Kappa? |
|---|
| Yes. The wholesaler’s catalogue links the number 46461041 and the Bosch numbers 0265216452 and 0273004105 to the Lancia Kappa. Always compare the numbers with your own part. |
| Who is the manufacturer of the unit? |
| The manufacturer is Bosch - the control unit housing is marked BOSCH, and the Bosch numbers begin with 0265 and 0273. |
| Is the part in working order? |
| The unit is used, working and original. The warranty period is given in the product features table. |
| What should I do if the numbers do not match? |
| Write to us and send a photo of the labels or your VIN. We will compare them with our offer before you order. |
Want to be sure the numbers fit? Send a photo of your ABS unit or your VIN - we will check it against our offer.
