A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki SX4 Bosch 5611080JA2 0265235157 0265950589
Vendors's code: 0265235157
Product code: 2551-943FD
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 5611080JA2 on an ABS pump mean?
Used ABS pump with control unit, number 5611080JA2, inspected before sale. Matched by the numbers on the block and sticker.
How to identify ABS pump 5611080JA2 for your Suzuki
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Suzuki cars. You will find number 5611080JA2 on the label, and the full set of numbers is given in the description below. The labels show no model or year, so we do not state them here and match the part by its numbers. Markings found on the parts (stamped or printed): 2WD. They help tell the module versions apart, but the full part number is what decides compatibility.
Part number 5611080JA2 and related numbers
The numbers from the listing, as written on the labels and as a single string:
- 56110-80JA2 (catalogue format: 5611080JA2), Suzuki number stamped on the hydraulic block,
- 0 265 235 157 (catalogue format: 0265235157), hydraulic block manufacturer's number,
- 0265950589, control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
What can point to an ABS pump failure
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| What is the difference between numbers 5611080JA2 and 0265235157? |
|---|
| One of the numbers is stamped on the hydraulic block, while the other comes from the module manufacturer or from the control unit sticker. When matching the part, compare all the numbers. |
| Which car model does this pump fit? |
| The labels show no model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.