A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Splash 51K0 / 06210208374 06210952933
Vendors's code: 062109-52933
Product code: 5466-1779C
Barcode:
Code 39:
ISBN:
1 626,02 zł
Price
1 626,02 zł
2 000,00 zł
Price
2 000,00 zł
Ask about the product
ABS pump and control module Suzuki Splash 51K0 / 06210208374 06210952933
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 06210208374 fits your Suzuki
Used ABS pump with control unit, number 06210208374, inspected before sale. Matched by the numbers on the block and sticker.
Is ABS pump 06210208374 the right part for your Suzuki?
This is a used original ABS pump with a control unit for Suzuki cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 06210208374, and the other numbers from the labels are listed below. The labels show no model or year, so we do not state them here and match the part by its numbers. Markings found on the parts (stamped or printed): 51K0, 2WD. They help tell the module versions apart, but the full part number is what decides compatibility.
Numbers and markings on the ABS pump
The numbers from the listing, as written on the labels and as a single string:
- 06.2102-0837.4 (catalogue format: 06210208374), hydraulic block manufacturer's number,
- 06.2109-5293.3 (catalogue format: 06210952933), control unit number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
When an ABS module needs replacing
- the ABS warning light comes on after the engine is started and stays on,
- the brake pedal pulses or feels uneven for no obvious reason,
- the ABS switches itself off shortly after the engine is started,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Which car model does this pump fit? |
|---|
| The labels show no model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| What do the codes 51K0, 2WD on the housing mean? |
| They are markings of the module version. They help tell the units apart, but the full part number is what decides compatibility. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
