A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Mazda ATE KA0G437A0A 06210976503
Vendors's code: KA0G437A0A
Product code: 06210976503
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
Ask about the product
ABS pump Mazda ATE KA0G437A0A 06210976503
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump KA0G437A0A fits your Mazda
Used original ABS module with number KA0G437A0A for Mazda. Confirm compatibility with the number from your original pump.
Is ABS pump KA0G437A0A the right part for your Mazda?
This module is made by ATE. ABS pump KA0G437A0A is sold together with its control unit, just as it is fitted to Mazda cars. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Numbers and markings on the ABS pump
The numbers as written on the labels and as a single string, the way catalogues list them:
- KA0G437A0A, original Mazda number,
- 06.2109-7650.3 (catalogue format: 06210976503), control unit number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What ABS problems can point to
- the ABS warning light comes on after the engine is started and stays on,
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking,
- the ABS warning light comes on together with the stability control warning light.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| What is the difference between numbers KA0G437A0A and 06210976503? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
