A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Ford ATE BV612C405AE 10096101433 10039934454
Vendors's code: 10039934454
Product code: BV612C405AE
Barcode:
Code 39:
ISBN:
£92.63
Price
£92.63
£113.94
Price
£113.94
Ask about the product
ABS pump Ford ATE BV612C405AE 10096101433 10039934454
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump BV612C405AE come complete with the control unit?
Used ABS pump with control unit, number BV612C405AE, inspected before sale. Matched by the numbers on the block and sticker.
Used Ford ABS pump with number BV612C405AE
This is a used original ABS pump with a control unit for Ford cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is BV612C405AE, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Numbers and markings on the ABS pump
The numbers from the listing, as written on the labels and as a single string:
- BV612C405AE, original Ford number,
- 10.0961-0143.3 (catalogue format: 10096101433), control unit number,
- 10.0399-3445.4 (catalogue format: 10039934454), additional number from the listing.
Matching by number is more reliable than matching by car model. Compare all the numbers and ask us if any of them does not match.
What can point to an ABS pump failure
- valve or pump motor faults are stored in the control unit memory,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| What is the difference between numbers BV612C405AE and 10096101433? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Who makes this module? |
| The module is made by ATE. The manufacturer's name does not change the numbers you should use to match the part. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
