A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Hyundai Mando 589203Z600 BE6003I550
Vendors's code: BE6003I550
Product code: 589203Z600
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
Ask about the product
ABS pump Hyundai Mando 589203Z600 BE6003I550
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will ABS pump 589203Z600 fit your Hyundai?
ABS pump 589203Z600 complete with control unit, used and inspected. Compare the numbers with the original in your car.
Hyundai ABS pump 589203Z600: hydraulic module with control unit
ABS module 589203Z600 is used and has been inspected before sale. It is intended for Hyundai cars, but whether it fits is decided by comparing the numbers with the original part in your car. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Numbers to compare
The numbers from the listing, as written on the labels and as a single string:
- 589203Z600, original Hyundai number,
- BE6003I550, additional number from the listing.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
Symptoms of a faulty ABS pump or control unit
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Are the make and model of the car enough to choose the part? |
|---|
| No. A single model comes with different versions of the module, depending on the engine, year of manufacture and drivetrain. The most reliable reference is the number on the original pump. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Who makes this module? |
| The module is made by Mando. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
