A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Volkswagen Bosch 6R0907379E 0265234575 0265950689
Vendors's code: 6R0907379E
Product code: 0265234575
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
When is ABS pump 6R0907379E the right choice for your Volkswagen?
Used ABS pump with control unit, number 6R0907379E, inspected before sale. Matched by the numbers on the block and sticker.
Volkswagen ABS pump: numbers 6R0907379E and 0265234575
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Volkswagen cars. You will find number 6R0907379E on the label, and the full set of numbers is given in the description below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Where to find the numbers on an ABS pump
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 6R0907379E, Volkswagen control unit number,
- 0 265 234 575 (catalogue format: 0265234575), hydraulic block manufacturer's number,
- 0 265 950 689 (catalogue format: 0265950689), control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
When an ABS module needs replacing
- the brake pedal pulses or feels uneven for no obvious reason,
- the ABS activates for no reason during normal braking,
- the ABS warning light comes on together with the stability control warning light,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Where do I find number 6R0907379E on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Which car model does this pump fit? |
| The listing does not state a model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.