A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer BMW X5 3540676248002 25916010
Vendors's code: 3540676248002
Product code: 2FF1-328A6
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this accelerator pedal potentiometer fit the BMW X5?
This is a used, working accelerator pedal potentiometer for BMW X5 - numbers 3540 6762 480-02 / 3540676248002; 259160-10 / 25916010. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer BMW X5
In the BMW X5, year 2004, the accelerator pedal potentiometer sends the signal to the engine control unit. We offer a used, working unit in good condition.
Numbers to compare
- 3540 6762 480-02 / 3540676248002 - BMW number (OEM)
- 259160-10 / 25916010 - additional part number
- 2004 - year according to the offer
Fitment
Compare the number 3540 6762 480-02 in full with the number on your potentiometer. Different versions were fitted in the same models, so the number decides the fit, not the model alone.
Symptoms of a faulty potentiometer
- the pedal works only over part of its travel,
- the engine stalls when you release the throttle,
- the throttle response is uneven or jumpy,
- the ECU reports a potentiometer signal fault.
Before you buy the potentiometer, check the connector and wiring and read the fault codes - a corroded contact or damaged wire causes similar symptoms.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part that works and is in good condition; the warranty period is given in the product attributes. |
| What should I check on delivery? |
| Check that the numbers on the part match the description and that the connector, housing and mountings show no visible damage. |
| Do you also sell connectors or wires? |
| This offer covers the potentiometer only. You will find other items in other shop categories, or ask us about availability. |
Send a photo of your potentiometer or its number to contact@auto24parts.com and we will confirm whether this part fits.