A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Ford Mondeo 2.0 TDCI 2S719F836DA
Vendors's code: 2S719F836DA
Product code: 2S719F836DA
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does part number 2S719F836DA fit your car?
This is a used, working accelerator pedal potentiometer for Ford Mondeo 2.0 TDCI - numbers 2S719F836DA. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Ford Mondeo
The potentiometer in this offer comes from a Ford Mondeo, engine 2.0 TDCI, year 2001-2005. It is a used, working part in good condition.
Numbers to compare
- 2S719F836DA - Ford number (OEM)
- 2.0 TDCI - engine according to the offer
- 2001-2005 - year according to the offer
Fitment
The offer states engine 2.0 TDCI. Even so, compare the number 2S719F836DA with the number on your potentiometer, because different versions were fitted in the same models.
Symptoms of a faulty potentiometer
- the engine or EPC warning light comes on,
- the engine goes into limp mode with reduced power,
- the accelerator pedal does not respond or responds with a delay,
- the idle speed is unstable.
Start by reading the fault codes and checking the connectors; replace the potentiometer only when the wiring is in order.
Questions and answers
| Where do I find the number on the potentiometer? |
|---|
| The number is on the housing of the potentiometer removed from the car. If you cannot read it, send us a photo. |
| Is the part new? |
| The potentiometer is used but working. The warranty is listed in the product attributes. |
| Do you also sell connectors or wires? |
| This offer covers the potentiometer only. You will find other items in other shop categories, or ask us about availability. |
Write to contact@auto24parts.com with the model, year, engine and the number on your potentiometer - we will check the fit.