A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Renault Clio 8200297335
Vendors's code: 8200297335
Product code: 8200297335
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Is 8200297335 the right part for your car?
This is a used, working accelerator pedal potentiometer for Renault Clio - numbers 82 00 297 335 / 8200297335. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Renault Clio
If the accelerator pedal in your Renault Clio, year 2005-2010, is reporting faults, this offer may help. We sell a used, working potentiometer in good condition.
Numbers to compare
- 82 00 297 335 / 8200297335 - Renault number (OEM)
- CTS - manufacturer
- 2005-2010 - year according to the offer
Fitment
Compare the number 8200297335 character by character with the label on your part and check that the connector and mounting points look the same.
Symptoms of a faulty potentiometer
- the engine holds raised revs without touching the pedal,
- acceleration is sluggish,
- an engine fault message appears on the dashboard,
- the car runs only at emergency revs.
Before buying, read the ECU fault codes and make sure the cause is not the wiring or the throttle body; only then replace the potentiometer.
Questions and answers
| Do you also sell connectors or wires? |
|---|
| This offer covers the potentiometer only. You will find other items in other shop categories, or ask us about availability. |
| What should I check on delivery? |
| Check that the numbers on the part match the description and that the connector, housing and mountings show no visible damage. |
| Is adaptation needed after replacement? |
| In some cars you need to clear the fault codes or adapt the pedal after replacement. This depends on the model and version, so check it before buying. |
Send fitment questions to contact@auto24parts.com - give the model, year, engine and the number on the part.