A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Airbag clock spring Opel Astra H 13236786 KR
Vendors's code: 204130
Product code: 13236786KR
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for clock spring 13236786 KR for your Opel Astra H?
Used steering wheel clock spring 13236786 KR, fitted to the Opel Astra H. Before ordering, match the number in the listing with the one on your part.
Airbag clock spring Opel Astra H 13236786 KR
This listing covers a driver airbag clock spring, number 13236786 KR, intended for the Opel Astra H. The part comes from a dismantled car and is used. This Astra H clock spring was made by Valeo. The housing shows a GM number with a letter code and a separate Valeo number.
Numbers on the label
- 13236786 KR / 13236786KR - OEM number (GM)
- 204130 - Valeo manufacturer number
Fitment according to the listing
- Opel Astra H
The clock spring connects the driver airbag, horn and steering wheel buttons to the car wiring. Inside there is a wound flat cable that lets the wheel turn without breaking the connection.
Signs of a worn clock spring
- the airbag warning light comes on, often after turning the wheel,
- the horn does not work,
- steering wheel buttons work intermittently or not at all.
Fitting tips
Before replacement, note the steering wheel position and do not rotate the removed clock spring. After fitting, check the horn, the buttons and the airbag light. Before work, disconnect the battery and wait the time specified by the car maker. Set the wheels straight and fit the clock spring in its centre position, using the marks on the housing.
Customer questions
| What condition is the clock spring in? |
|---|
| It is a used part from a dismantled car. If you need details of its condition, ask us before buying. |
| How do I check that it fits? |
| Compare the number on your clock spring housing with the number in the listing, then the model and year of your car. |
| Can I send a photo of my part? |
| Yes, send a photo of the label to contact@auto24parts.com and we will check the fit. |
We are happy to help: contact@auto24parts.com. Include your car model and a photo of your clock spring.