A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Airbag clock spring Opel Astra H 13250226 GH
Vendors's code: 204278
Product code: 13250226GH
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Clock spring 13250226 GH - is it the right one for your car?
We offer a used airbag clock spring 13250226 GH for the Opel Astra H. The number on the housing decides the fit, so check it before you order.
Airbag clock spring Opel Astra H 13250226 GH
This listing covers a driver airbag clock spring, number 13250226 GH, intended for the Opel Astra H. The part comes from a dismantled car and is used. This Astra H clock spring was made by Valeo. The housing shows a GM number with a letter code and a separate Valeo number.
Markings on the housing
- 13250226 GH / 13250226GH - OEM number (GM)
- 204278 - Valeo manufacturer number
Fitment according to the listing
- Opel Astra H
It links the rotating steering wheel with the fixed column. The flat cable in the housing carries the airbag circuit and the button signals.
When to replace the clock spring
- steering wheel buttons work intermittently or not at all,
- you hear clicking or rubbing when turning the wheel,
- the airbag module stores a driver airbag circuit fault.
Fitting tips
Before replacement, note the steering wheel position and do not rotate the removed clock spring. After fitting, check the horn, the buttons and the airbag light. The airbag system contains pyrotechnic charges, so fitting is best left to a workshop. After replacement the fault may need clearing in the airbag module with a diagnostic tool.
Questions and answers
| How do I check that it fits? |
|---|
| Compare the number on your clock spring housing with the number in the listing, then the model and year of your car. |
| Will the airbag light go out after replacement? |
| If the clock spring was the cause, usually yes, but a stored fault sometimes has to be cleared with a diagnostic tool. |
| Can I send a photo of my part? |
| Yes, send a photo of the label to contact@auto24parts.com and we will check the fit. |
We are happy to help: contact@auto24parts.com. Include your car model and a photo of your clock spring.