A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Airbag clock spring Opel Vectra C Signum 13165350 EC
Vendors's code: 13165350EC
Product code: 13165350EC
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Clock spring 13165350 EC - is it the right one for your car?
This is a used airbag clock spring with number 13165350 EC, used in the Opel Vectra C and Opel Signum. Before buying, compare the number with the label on your clock spring.
Airbag clock spring Opel Vectra C Signum 13165350 EC
This listing covers a driver airbag clock spring, number 13165350 EC, intended for the Opel Vectra C and Opel Signum. The part comes from a dismantled car and is used. In the Vectra C and Signum the clock spring is part of the module under the steering wheel, and versions differ by the letter code next to the GM number.
Markings on the housing
- 13165350 EC / 13165350EC - OEM number (GM)
Which cars it fits
- Opel Vectra C
- Opel Signum
A clock spring is a housing with a coiled flat cable. It keeps the airbag and steering wheel buttons connected to the wiring, even at full lock.
When to replace the clock spring
- the airbag warning light comes on, often after turning the wheel,
- steering wheel buttons work intermittently or not at all,
- the airbag module stores a driver airbag circuit fault.
Fitting tips
The airbag system contains pyrotechnic charges, so fitting is best left to a workshop. After replacement the fault may need clearing in the airbag module with a diagnostic tool. The clock spring is fitted with the wheels pointing straight ahead and in the centre position. If it is set wrongly, it can tear at the first full turn.
Frequently asked questions
| How do I check that it fits? |
|---|
| Compare the number on your clock spring housing with the number in the listing, then the model and year of your car. |
| Does the clock spring need centring before fitting? |
| Yes. It is fitted in the centre position with the wheels pointing straight ahead. |
| Can I send a photo of my part? |
| Yes, send a photo of the label to contact@auto24parts.com and we will check the fit. |
We are happy to help: contact@auto24parts.com. Include your car model and a photo of your clock spring.