A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Airbag control module Mazda 670002727601, BP4K57K30C, 0285001554
Vendors's code: 0285001554
Product code: 670002727601
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does airbag module 670002727601 fit your car?
Airbag ECU 670002727601 made by Bosch for the Mazda. This is a used part. The safest way to match it is by the number on the housing sticker.
Airbag control module Mazda 670002727601, BP4K57K30C, 0285001554
Looking for module number 670002727601? We have an airbag control module made by Bosch for the Mazda. This is a used part. You can collect the module in person or order it with shipping. This offer comes with a 6-month warranty.
Label data and numbers to compare
- 670002727601 - OEM number
- BP4K57K30C - OEM number
- 0285001554 - module manufacturer number
- manufacturer: Bosch
Which cars it fits
- Mazda
- production year: 2004
Different versions of the module were fitted to the same car model, so match it by number, not by appearance.
How an airbag control module works
The module evaluates signals from its built-in acceleration sensor and from the crash sensors. When it detects a collision, it fires the airbags and seat belt pretensioners within milliseconds. The module is usually mounted in the middle of the car, for example under the centre console or on the floor tunnel, where it can best measure body deceleration in an impact.
Typical fault symptoms
These symptoms can point to a module fault:
- the diagnostic tester cannot connect to the airbag module,
- the airbag light comes on intermittently or flashes,
- after accident repairs the module fails the system self-test.
Fitting and start-up
Also inspect the plugs and wiring leading to the module, because a damaged harness causes symptoms similar to a module fault. Fit the module according to the driving-direction arrow on the housing and tighten it firmly, as a loose mounting disturbs acceleration measurement.
Questions and answers
| Can I ask about compatibility before buying? |
|---|
| Yes. Send us the number from the label and your car details (VIN, year) and we will check it. |
| Who should fit the module? |
| The airbag system contains pyrotechnic charges, so fitting is best left to a workshop. |
| Can a module be reused after an accident? |
| After the airbags deploy, the module usually stores crash data and has to be replaced or have that data cleared by a specialist workshop. |
Not sure about the number? Send a photo of the label to contact@auto24parts.com and we will help you choose.