A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Airbag control module Opel Corsa B 90532443 AG, 90532443, 5WK4189
Vendors's code: 5WK4189
Product code: 90532443AG
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check that airbag module 90532443 AG is the right one?
Airbag ECU 90532443 AG made by Siemens for the Opel Corsa B. This is a used part. The safest way to match it is by the number on the housing sticker.
Airbag control module Opel Corsa B 90532443 AG, 90532443, 5WK4189
Airbag control module 90532443 AG made by Siemens is the central unit of the airbag system in the Opel Corsa B. This is a used part. You can collect the module in person or order it with shipping. This offer comes with a 6-month warranty.
Numbers and markings
- 90532443 AG - OEM number
- 90532443 - OEM number
- 5WK4189 - module manufacturer number
- manufacturer: Siemens
Vehicle compatibility
- Opel Corsa B
Different versions of the module were fitted to the same car model, so match it by number, not by appearance.
Its role in the safety system
The module evaluates signals from its built-in acceleration sensor and from the crash sensors. When it detects a collision, it fires the airbags and seat belt pretensioners within milliseconds. It is the central unit of the passive safety system. It decides whether and which airbags and pretensioners should deploy, and it records data about the event afterwards.
Signs that the module should be checked
It is worth checking this module if:
- the diagnostic tester cannot connect to the airbag module,
- the module recorded crash data after the airbags deployed,
- the airbag light comes on intermittently or flashes.
Fitting tips
After fitting, clear the fault codes and check that the airbag light goes out a few seconds after you switch on the ignition. Fit the module according to the driving-direction arrow on the housing and tighten it firmly, as a loose mounting disturbs acceleration measurement.
FAQ before you buy
| Does the module need programming? |
|---|
| On some models it has to be coded or adapted with a diagnostic tool after replacement. If you are not sure about your car, ask a workshop or write to us. |
| How can I receive my order? |
| You can collect the module in person or order it with shipping. |
| Can a module be reused after an accident? |
| After the airbags deploy, the module usually stores crash data and has to be replaced or have that data cleared by a specialist workshop. |
Need a different number? Browse the Airbag control modules category or write to contact@auto24parts.com.