A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Alfa Romeo ATE 10120207014 10096428273 10062937461 28554010513
Vendors's code: 10120207014
Product code: 10096428273
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
Ask about the product
ABS pump and control module Alfa Romeo ATE 10120207014 10096428273 10062937461 28554010513
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check the four ATE numbers in this ABS unit?
A used, working, original ABS pump and control module unit from an Alfa Romeo vehicle. We give three ATE numbers from group 10 and one from group 28.
ABS unit Alfa Romeo: ATE 10.1202-0701.4, 10.0964-2827.3 and two more
The listing covers a unit with an ABS pump and control module, taken from an Alfa Romeo vehicle. It is used, in working order and original. We do not state the model - selection is by part numbers. All four numbers are ATE numbers: three from group 10 and one from group 28. The listing title contains the first two, and you will find the full list below.
The full set of four ATE numbers
- 10120207014 - ATE number from group 10: 10.1202-0701.4
- 10096428273 - ATE number from group 10: 10.0964-2827.3
- 10062937461 - ATE number from group 10: 10.0629-3746.1
- 28554010513 - ATE number from group 28: 28.5540-1051.3
The two numbers in the title are only part of the set. When comparing, also take into account 10062937461 and 28554010513. We do not assign the roles of pump and control module to the numbers.
Typical reasons for searching
It is usually sought when:
- the ABS warning light is constantly on in the dashboard,
- the tester reports an ATE module fault,
- the ABS system does not enter operating mode after ignition,
- the pump runs irregularly or not at all.
Before buying, rule out simpler causes: wheel sensors, wiring, fuses, power supply. After fitting, bleed the brake system. Leave any coding of the control module to the workshop.
Answers to questions about numbers
| Are the two numbers from the title enough? |
|---|
| No, the listing has four ATE numbers. Compare all of them, not just the first two. |
| What is the difference between group 10 and group 28? |
| They are ATE numbering ranges: 10.xxxx-xxxx.x and 28.xxxx-xxxx.x. We do not settle the role of each of them. |
| What condition is the unit in? |
| Used, in working order and original. The warranty period is given in the product features table. |
| How do I write 28554010513 in ATE form? |
| As 28.5540-1051.3. Both forms mean the same number. |
Do you have different numbers from those on the list? Write to us before you buy and we will check whether any of them match.
