A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Alfa Romeo ATE 10120228514 10096428883 10063535741 28554261053 28554087005
Vendors's code: 10120228514
Product code: 10096428883
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Five numbers in one listing - how do you check which one you have?
A used, working, original ABS pump and control module unit for an Alfa Romeo. We do not state the model - selection is by part numbers. Two numbers are in the title, and we give three more in addition.
Alfa Romeo: ABS 10.1202-2851.4 and 10.0964-2888.3 plus three additional ATE numbers
The listing title contains two numbers, but in the description we have five. All come from ATE numbering: 10.1202-2851.4, 10.0964-2888.3, 10.0635-3574.1, 28.5542-6105.3 and 28.5540-8700.5. The ABS unit is used, in working order and original, assigned to the Alfa Romeo make. We do not state the model - selection is by part numbers. You do not need to have all five on your part.
The full list of five ATE numbers
- 10120228514 - ATE number: 10.1202-2851.4 - from the listing title
- 10096428883 - ATE number: 10.0964-2888.3 - from the listing title
- 10063535741 - additional ATE number given in the listing: 10.0635-3574.1
- 28554261053 - additional ATE number given in the listing: 28.5542-6105.3
- 28554087005 - additional ATE number given in the listing: 28.5540-8700.5
Why so many? We give everything we know from the listing and assign nothing to individual components. It is enough if the numbers visible on your part match the list. Similar listings with number 10.1202-2581.4 have different middle groups of digits.
When you are thinking about replacing the unit
The reasons vary, for example:
- the ABS light is on continuously,
- diagnostics point to damage to the control module or the pump,
- the ABS does not switch on, or switches off while driving,
- the ABS module does not respond to tester queries.
First eliminate causes simpler than replacing the whole unit: read the fault codes, inspect the wheel sensors and wiring harness, measure the voltage. After fitting, bleed the brake system; ask the workshop about any coding of the module.
How to cope with such a long list
| Do I have to have all five numbers? |
|---|
| No. Check the ones you can see on your part and compare them with the list. |
| Which numbers are in the listing title? |
| 10.1202-2851.4 and 10.0964-2888.3. We give the other three in addition. |
| Are the additional numbers a different part? |
| No. They are additional numbers given in the listing, without assigning them to the pump or the control module. |
| What if I only have one number from the list? |
| Send it to us together with any other numbers you have. We will help assess compatibility. |
Lost among the numbers? Send them to us in one message and we will check which of them appear in this listing.