A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo / Fiat 0281018703 51915432
Vendors's code:
Product code: 4971-54396
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo / Fiat 0281018703 51915432
Engine control unit with part numbers 0281018703 and 51915432 designed for selected Alfa Romeo and Fiat models – available in locked or unlocked version, check the description before purchase.
Does the Ecu engine controller Alfa Romeo / Fiat 0281018703 fit my car?
The Ecu engine controller with the number 0281018703 is designed for selected Alfa Romeo and Fiat models. Checking the part number on your current unit ensures that the purchased Ecu engine controller will be fully compatible with your vehicle.
An alternative number to check is 51915432, which often accompanies 0281018703.
What does part number 51915432 mean in the Ecu engine controller?
The number 51915432 identifies a specific model of Ecu engine controller used in Alfa Romeo and Fiat cars. This is important when replacing the engine computer, as it ensures the correct unit is chosen and avoids compatibility issues.
Many controllers also carry the number 0281018703 – both markings help confirm that the part fits your car.
Why should I check 0281018703 and 51915432 before purchase?
Part numbers are key to matching the correct Ecu engine controller. 0281018703 and 51915432 specify the exact model of the control computer, giving you confidence that the new part will function properly in your vehicle.
Is the Ecu engine controller 51915432 / 0281018703 available in different variants?
Yes, the Ecu engine controller with numbers 51915432 and 0281018703 is available in our store in two variants: locked or unlocked. Before purchasing, review the variant description to select the correct controller for installation in your vehicle.
How to identify the Ecu engine controller by numbers 0281018703 and 51915432?
The easiest way is to check the markings directly on the old controller's casing. If you find 0281018703 or 51915432, it indicates that this is the exact control computer model that fits selected Alfa Romeo and Fiat models.
Do numbers 0281018703 and 51915432 refer to the same Ecu engine controller?
Yes, often one Ecu engine controller has two manufacturer numbers. 0281018703 and 51915432 may refer to the same control unit, so it is recommended to check both markings when purchasing or matching parts.