A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo Giulietta 1.6 JTDM 0281017785 51916024
Vendors's code:
Product code: 6A01-2364F
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo Giulietta 1.6 JTDM 0281017785 51916024
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo Giulietta 1.6 JTDM BOSCH 0281017785 51916024
Engine control unit with part numbers 0 281 017 785, 0281017785, and 51916024 dedicated to Alfa Romeo Giulietta 1.6 JTDM – available in locked or unlocked version, check the variant description before purchase.
Does the Alfa Romeo Giulietta 1.6 JTDM engine control unit 0281017785 51916024 fit my car?
The engine control unit with numbers 0281017785 and 51916024 is intended for the Alfa Romeo Giulietta 1.6 JTDM model. Checking the numbers on your current unit ensures the new ECU will be compatible with your vehicle.
Both part numbers – 0281017785 and 51916024 – help confirm the correct ECU model before purchase.
What does part number 51916024 mean in the engine control unit?
Part number 51916024 identifies a specific ECU used in the Alfa Romeo Giulietta 1.6 JTDM. This number makes it easy to match a replacement and avoid compatibility issues.
ECUs with numbers 0281017785 and 51916024 are often sold together, as both numbers refer to the same control unit.
Why check 0281017785 and 51916024 before buying?
Checking part numbers is key to properly matching an ECU. Numbers 0281017785 and 51916024 ensure the engine computer will work correctly in your car and prevent a wrong purchase.
Is the 51916024 / 0281017785 ECU available in different variants?
Yes, in our store, the ECU with numbers 51916024 and 0281017785 is available in two variants: locked or unlocked. Before buying, check the variant description to choose the correct unit for your vehicle.
How to identify the engine control unit by numbers 0281017785 and 51916024?
The easiest way is to check the markings directly on the old unit. If you find 0281017785 or 51916024, it means it is exactly the ECU model used in the Alfa Romeo Giulietta 1.6 JTDM.
Do numbers 0281017785 and 51916024 refer to the same ECU?
Yes, an ECU often has two manufacturer numbers. 0281017785 and 51916024 may refer to the same control unit, so it’s always recommended to check both before purchase.
