A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo Giulietta 51896758 8GMF.A9
Vendors's code:
Product code: 1AA8-2727E
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
€400.00
Price
€400.00
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo Giulietta 51896758 8GMF.A9
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo Giulietta 51896758 8GMF.A9
Engine control unit with part number 51896758 (8GMF.A9) designed for Alfa Romeo Giulietta – available in locked or unlocked version, check the description before purchase.
Does the Alfa Romeo Giulietta engine control unit 51896758 8GMF.A9 fit my car?
The engine control unit with numbers 51896758 and 8GMF.A9 is used in the Alfa Romeo Giulietta. Checking the numbers on your current ECU ensures that the new unit will be fully compatible with your vehicle.
Both part numbers – 51896758 and 8GMF.A9 – help confirm the correct engine control unit model before purchase.
What does the part number 8GMF.A9 mean in the engine control unit?
The number 8GMF.A9 identifies a specific engine control unit used in the Alfa Romeo Giulietta. This number allows you to easily match a replacement and avoid compatibility issues.
Units with numbers 51896758 and 8GMF.A9 often appear together because both refer to the same control unit.
Why check numbers 51896758 and 8GMF.A9 before buying?
Checking the part numbers is key to properly matching the engine control unit. Numbers 51896758 and 8GMF.A9 ensure the ECU will work correctly in your car and help prevent incorrect purchases.
Is the 8GMF.A9 / 51896758 engine control unit available in different variants?
Yes, in our store the engine control unit with numbers 8GMF.A9 and 51896758 is available in two variants: locked or unlocked. Before purchasing, check the variant description to choose the correct unit for installation in your vehicle.
How to identify the engine control unit by numbers 51896758 and 8GMF.A9?
The easiest way is to check the markings directly on the old unit’s housing. If you find 51896758 or 8GMF.A9, it means this is exactly the model used in the Alfa Romeo Giulietta.
Do numbers 51896758 and 8GMF.A9 refer to the same engine control unit?
Yes, a single engine control unit often has two manufacturer numbers. 51896758 and 8GMF.A9 may refer to the same control unit, so it is always recommended to check both numbers before purchasing.
