The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
Engine Control Unit Alfa Romeo Giulietta 51896758 8GMF.A9
Vendors's code:
Product code: 1AA8-2727E
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
Regular price:
€325.20
0%
€400.00
Price
€400.00
Regular price:
€400.00
0%
In stock
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
Engine Control Unit Alfa Romeo Giulietta 51896758 8GMF.A9
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo Giulietta 51896758 8GMF.A9
Engine control unit with part number 51896758 (8GMF.A9) designed for Alfa Romeo Giulietta – available in locked or unlocked version, check the description before purchase.
Does the Alfa Romeo Giulietta engine control unit 51896758 8GMF.A9 fit my car?
The engine control unit with numbers 51896758 and 8GMF.A9 is used in the Alfa Romeo Giulietta. Checking the numbers on your current ECU ensures that the new unit will be fully compatible with your vehicle.
Both part numbers – 51896758 and 8GMF.A9 – help confirm the correct engine control unit model before purchase.
What does the part number 8GMF.A9 mean in the engine control unit?
The number 8GMF.A9 identifies a specific engine control unit used in the Alfa Romeo Giulietta. This number allows you to easily match a replacement and avoid compatibility issues.
Units with numbers 51896758 and 8GMF.A9 often appear together because both refer to the same control unit.
Why check numbers 51896758 and 8GMF.A9 before buying?
Checking the part numbers is key to properly matching the engine control unit. Numbers 51896758 and 8GMF.A9 ensure the ECU will work correctly in your car and help prevent incorrect purchases.
Is the 8GMF.A9 / 51896758 engine control unit available in different variants?
Yes, in our store the engine control unit with numbers 8GMF.A9 and 51896758 is available in two variants: locked or unlocked. Before purchasing, check the variant description to choose the correct unit for installation in your vehicle.
How to identify the engine control unit by numbers 51896758 and 8GMF.A9?
The easiest way is to check the markings directly on the old unit’s housing. If you find 51896758 or 8GMF.A9, it means this is exactly the model used in the Alfa Romeo Giulietta.
Do numbers 51896758 and 8GMF.A9 refer to the same engine control unit?
Yes, a single engine control unit often has two manufacturer numbers. 51896758 and 8GMF.A9 may refer to the same control unit, so it is always recommended to check both numbers before purchasing.
