A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo MiTo 1.4 50514315
Vendors's code:
Product code: 50514315
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo MiTo 1.4 50514315
Engine control unit with part number 50514315 dedicated to Alfa Romeo MiTo 1.4 – available in locked or unlocked version, check the variant description before purchase.
Is the Alfa Romeo MiTo 1.4 engine control unit 50514315 compatible with my car?
The engine control unit with number 50514315 is used in the Alfa Romeo MiTo 1.4. Checking the marking on your current ECU ensures that the new unit will be compatible with your vehicle.
The part number 50514315 is essential when selecting the ECU – comparing it with the marking on the old unit helps avoid incorrect purchases.
What does the part number 50514315 mean in the Alfa Romeo MiTo ECU?
The number 50514315 identifies a specific engine control unit installed in Alfa Romeo MiTo 1.4 models. This allows you to match a replacement that will work properly with your car.
It is advisable to check that 50514315 appears on the old ECU before buying a new unit.
Why should I check number 50514315 before buying an ECU?
Checking the part number, such as 50514315, is the most reliable way to select the correct ECU. This ensures compatibility with your car and avoids installation issues.
Comparing the number with the old unit increases the likelihood of a correct purchase and speeds up replacement.
Is ECU 50514315 available in different variants?
Yes, the ECU with number 50514315 is available in our store in two variants: locked or unlocked. It is recommended to review the description of the variants before purchase to select the proper unit for installation.
How to identify the ECU by number 50514315?
The simplest way to identify the correct ECU is to check the number on the old unit’s housing. If 50514315 is present, it is the correct ECU model for Alfa Romeo MiTo 1.4.
This practical method ensures the new part will fit your vehicle.
Is number 50514315 the only way to identify the ECU?
The number 50514315 is the main marking for this control unit, but sometimes manufacturers also use additional codes or electronic identifiers. Therefore, it is advisable to check the entire label on the ECU and compare all visible numbers before purchasing.
This provides greater certainty that the selected ECU will be fully compatible with your car.