A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine Control Unit Alfa Romeo MiTo 1.6 JTD 0281015573 51860180
Vendors's code:
Product code: 0506-761C0
Barcode:
Code 39:
ISBN:
£94.22
Price
£94.22
Regular price:
£94.22
0%
£115.89
Price
£115.89
Regular price:
£115.89
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine Control Unit Alfa Romeo MiTo 1.6 JTD 0281015573 51860180
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.18
-
shipping
(Poland)
from
£23.18
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo MiTo 1.6 JTD 0281015573 51860180
Engine control unit with part numbers 0281015573 and 51860180 dedicated to Alfa Romeo MiTo 1.6 JTD – available in locked or unlocked version, check the variant description before purchase.
Does the engine control unit Alfa Romeo MiTo 1.6 JTD 0281015573 51860180 fit my car?
The engine control unit with part numbers 0281015573 and 51860180 is used in the Alfa Romeo MiTo 1.6 JTD model. Checking these markings on your current unit is the simplest way to ensure that the new part will be fully compatible with your car.
The part numbers 0281015573 and 51860180 are crucial when matching the correct engine control unit, so it is always worth comparing them before purchase. :contentReference[oaicite:0]{index=0}
In our store, the engine control unit is available in two variants – locked or unlocked – so please review the variant descriptions before choosing.
What does the part number 51860180 mean in the Alfa Romeo MiTo 1.6 JTD engine control unit?
The number 51860180 identifies a specific engine control unit used in Alfa Romeo MiTo 1.6 JTD models. This marking helps easily select the correct replacement and avoid compatibility issues.
In practice, the number 51860180 is very often paired with 0281015573, as both refer to the same control unit. :contentReference[oaicite:1]{index=1}
Why is it worth checking the numbers 0281015573 and 51860180 before buying the engine control unit?
Checking the part numbers is the most important step when selecting an engine control unit. The numbers 0281015573 and 51860180 define the exact model of the computer that controls your engine.
Comparing them with the markings on your old part helps avoid mistakes and ensures that the new unit will work correctly after installation.
Is the engine control unit 51860180 / 0281015573 available in different variants?
Yes, the engine control unit with part numbers 51860180 and 0281015573 is available in two variants: locked or unlocked. The locked version requires programming, while the unlocked version allows easier adaptation to the vehicle.
Be sure to check the variant description before purchasing to choose the best option for your needs. :contentReference[oaicite:2]{index=2}
How to identify the engine control unit by numbers 0281015573 or 51860180?
To ensure you have the correct engine control unit, check the markings on its housing. If you find the numbers 0281015573 or 51860180, it means it is a model used in Alfa Romeo MiTo 1.6 JTD.
This is the simplest and most reliable way to match the correct part before purchase.
Do the numbers 0281015573 and 51860180 refer to the same engine control unit?
Yes, one engine control unit can have multiple manufacturer markings. The numbers 0281015573 and 51860180 most often refer to the same control unit, so it is important to consider both when searching for the part.
This increases your chances of quickly finding the correct engine control unit and avoiding a wrong purchase. :contentReference[oaicite:3]{index=3}
