A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller Alfa Romeo MiTo 55260721 MJD 8F3.M2
Vendors's code:
Product code: DA0D-10130
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
€400.00
Price
€400.00
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller Alfa Romeo MiTo 55260721 MJD 8F3.M2
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control module Alfa Romeo MiTo 55260721 MJD 8F3.M2
The engine control module for Alfa Romeo MiTo with part number 55260721 MJD 8F3.M2 is a proven component used in many versions of this model, available in either locked or unlocked variants.
Does the engine control module 55260721 fit the Alfa Romeo MiTo?
The engine control module with the number 55260721 and designation MJD 8F3.M2 is dedicated to the Alfa Romeo MiTo model and is often an exact match by part number. If your old module has the same number, you have a very high chance of full compatibility.
What does the MJD 8F3.M2 designation mean in the 55260721 module?
The MJD 8F3.M2 designation in the 55260721 engine control module indicates a specific software version and type of engine control module. This makes it easier to select the correct part for the Alfa Romeo MiTo and avoid compatibility issues.
Does the 55260721 engine control module require programming?
The 55260721 MJD 8F3.M2 engine control module may require adaptation to the vehicle. Depending on the version, modules are available in locked or unlocked variants, so it is important to check the description before purchase.
How to check if the 55260721 module will work in my car?
The best way is to compare the 55260721 number with the number on your current engine control module. If the numbers match, the part should fit your Alfa Romeo MiTo without any issues.
Why is the 55260721 number important when choosing an engine control module?
The 55260721 number uniquely identifies the engine control module, allowing you to quickly find the correct part for your vehicle. This is the most reliable way to ensure proper fitment without the risk of error.
Is the MJD 8F3.M2 55260721 module ready for installation?
For the 55260721 module with MJD 8F3.M2 designation, it depends on its version. The store offers engine control module variants in locked or unlocked versions, so it is worth reviewing the description before making a choice.
What symptoms does a faulty 55260721 module cause?
A faulty 55260721 engine control module may cause starting problems, uneven engine operation, or no communication with the diagnostic computer. In such cases, replacement with a working unit is often necessary.
Does the MJD 8F3.M2 designation occur in other modules?
The MJD 8F3.M2 designation may appear in different module configurations, however the 55260721 number refers to a specific version. Always rely on the full designation to avoid mistakes.
What should you consider when buying the 55260721 module?
When purchasing the 55260721 engine control module, the most important factors are number matching, technical condition, and selecting the correct variant (locked or unlocked). This ensures smooth installation and proper operation.
