A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit Audi 0260002881 4Z7927156N
Vendors's code: 0260002881
Product code: 48C2-181B1
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for a gearbox control unit for the Audi?
This is a used, working automatic gearbox control unit for the Audi - numbers 0260002881; 4Z7927156N. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit Audi
In the Audi the gearbox control unit runs the automatic transmission. We offer a used, working unit in good condition.
Numbers to compare
- 0260002881 - Bosch number
- 4Z7927156N - VAG number (OEM)
Fitment
Compare the number 0 260 002 087 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty gearbox control unit
- the unit cannot be read with a diagnostic tool,
- the gearbox warning light stays on after starting the engine,
- the gearbox shifts unevenly or at the wrong moment,
- a gearbox failure message appears after switching on the ignition.
First rule out the speed sensors, solenoid valves, wiring and battery, as their faults produce symptoms similar to a failed control unit.
Questions and answers
| What condition is this control unit in? |
|---|
| It is a used, working control unit in good condition, covered by a 6-month warranty. |
| Does the gearbox control unit need coding after replacement? |
| Often yes - it depends on the make and version of the car. In many cars a used unit needs coding or adaptation with a diagnostic tool in a workshop. |
| How do I check whether the control unit will fit my car? |
| Compare the model, year and the numbers on the unit fitted in your car with the numbers in the description. You can also send us a photo. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.