A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit BMW Bosch 0260002285 1421239
Vendors's code: 0260002285
Product code: 0871-85770
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Gearbox control unit with number 0260002285 - is it the right part?
This is a used, working automatic gearbox control unit for the BMW - numbers 0 260 002 285 / 0260002285; 1 421 239 / 1421239. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit BMW
The gearbox control unit manages gear changes based on data from the car. We offer a used unit for the BMW, working and in good condition.
Numbers to compare
- 0 260 002 285 / 0260002285 - Bosch number
- 1 421 239 / 1421239 - additional part number
Fitment
The number 0 260 002 514 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty gearbox control unit
- the car enters limp mode and stays in one gear,
- you feel jerks or slipping when pulling away,
- gear changes take longer than usual,
- a gearbox failure message appears after switching on the ignition.
Reading the fault codes with a diagnostic tool helps tell a control unit fault from a failure of sensors, solenoid valves or the gearbox itself.
Questions and answers
| How do I check whether the control unit will fit my car? |
|---|
| Compare the model, year and the numbers on the unit fitted in your car with the numbers in the description. You can also send us a photo. |
| Which number matters most for fitment? |
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
| What condition is this control unit in? |
| It is a used part, working and in good condition, covered by a 6-month warranty. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.