A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit BMW Bosch 0260002285 1422388
Vendors's code: 0260002285
Product code: D8AB-6779A
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose a gearbox control unit for the BMW?
This is a used, working automatic gearbox control unit for the BMW - numbers 0 260 002 285 / 0260002285; 1 422 388 / 1422388. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit BMW
The gearbox control unit receives signals from the sensors and decides when and how gears are changed. The unit on offer comes from a BMW and is used, working and in good condition.
Numbers to compare
- 0 260 002 285 / 0260002285 - Bosch number
- 1 422 388 / 1422388 - additional part number
Fitment
The number CFC319A.01 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty gearbox control unit
- the diagnostic tool stores power supply or communication faults for the unit,
- diagnostics point to the gearbox control unit,
- the gearbox warning light is on in the dashboard,
- gear changes are too harsh or too soft.
Before buying, make sure the cause is not the gearbox oil, the power supply or a sensor, and only then replace the control unit.
Questions and answers
| Can a control unit with a different number fit too? |
|---|
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
| What does "used, working" mean? |
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| Which number matters most for fitment? |
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.