A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit BMW E38 728 E39 523 Bosch 0260002429 1423389
Vendors's code: 0260002429
Product code: D07E-967BF
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this gearbox control unit fit the BMW E38 728 E39 523?
This is a used, working automatic gearbox control unit for the BMW E38 728 E39 523 - numbers 0 260 002 429 / 0260002429; 1 423 389 / 1423389. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit BMW E38 728 E39 523
If the gearbox in your BMW E38 728 E39 523 reports faults, this listing may help. We sell a used, working control unit in good condition.
Numbers to compare
- 0 260 002 429 / 0260002429 - Bosch number
- 1 423 389 / 1423389 - additional part number
Fitment
The number CFC209F.01 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty gearbox control unit
- a gearbox fault message appears,
- the diagnostic tool shows gearbox control unit faults,
- the gearbox does not respond to a change of driving mode,
- the unit cannot be read with a diagnostic tool.
First rule out the speed sensors, solenoid valves, wiring and battery, as their faults produce symptoms similar to a failed control unit.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| Can a control unit with a different number fit too? |
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
| Do you also sell solenoid valves or the complete gearbox? |
| This listing covers the control unit only. You will find other gearbox parts in the other categories of the shop. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.