A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit BMW E38 Bosch 0260002346 1422353
Vendors's code: 0260002346
Product code: 6C76-305A6
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for a gearbox control unit for the BMW E38?
This is a used, working automatic gearbox control unit for the BMW E38 - numbers 0 260 002 346 / 0260002346; 1 422 353 / 1422353. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit BMW E38
In the BMW E38, engine 3.0, year 1996 the gearbox control unit runs the automatic transmission. We offer a used, working unit in good condition.
Numbers to compare
- 0 260 002 346 / 0260002346 - Bosch number
- 1 422 353 / 1422353 - additional part number
- 1422356 - additional part number
Fitment
The number 0 260 002 702 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty gearbox control unit
- the gearbox warning light is on in the dashboard,
- the selected gear indicator does not work properly,
- gear changes are too harsh or too soft,
- the gearbox goes into limp mode once the car is warm.
Reading the fault codes with a diagnostic tool helps tell a control unit fault from a failure of sensors, solenoid valves or the gearbox itself.
Questions and answers
| How do I check whether the control unit will fit my car? |
|---|
| Compare the model, year and the numbers on the unit fitted in your car with the numbers in the description. You can also send us a photo. |
| What does "used, working" mean? |
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| What should I check on delivery? |
| Check that the numbers on the unit match the description and that the connector and housing show no visible damage. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.