Skip to main content
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Automatic gearbox control unit Chrysler Dodge P04686707AK

  • Part Type Automatic gearbox control unit
  • Vehicle Make and Model Chrysler Dodge
  • Year of Manufacture 1995-1998
  • Manufacturer Part Number P04686707AK
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
ORYGINAL
with VAT without VAT
Price 280,00 zł
Availability:
In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Shipping time: 24 h
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Automatic gearbox control unit
  • Vehicle Make and Model Chrysler Dodge
  • Year of Manufacture 1995-1998
  • Manufacturer Part Number P04686707AK
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Gearbox control unit for the Chrysler Dodge - what should you check before buying?

This is a used, working automatic gearbox control unit for the Chrysler Dodge - numbers P04686707AK. Before buying, compare the numbers with the label on the unit in your car.

Go to full description

Automatic gearbox control unit Chrysler Dodge

The gearbox control unit receives signals from the sensors and decides when and how gears are changed. The unit on offer comes from a Chrysler Dodge, year 1995-1998 and is used, working and in good condition.

Numbers to compare

  • P04686707AK - Chrysler number (OEM)

Fitment

The number 0 260 002 034 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.

Signs of a faulty gearbox control unit

  • the diagnostic tool shows gearbox control unit faults,
  • a gearbox failure message appears after switching on the ignition,
  • gear changes take longer than usual,
  • the car enters limp mode and stays in one gear.

Corroded connectors and a weak battery cause similar symptoms - check them before buying.

Questions and answers

Why does the number have several spellings?
The same number on the housing can be written with spaces or as one string. We give both forms so it is easier to find.
What condition is this control unit in?
It is a used, working control unit in good condition, covered by a 6-month warranty.
What should I check on delivery?
Check that the numbers on the unit match the description and that the connector and housing show no visible damage.

Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more