A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit Chrysler Voyager P04727535AB
Vendors's code: P04727535AB
Product code: A0DE-340FC
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this gearbox control unit fit the Chrysler Voyager?
This is a used, working automatic gearbox control unit for the Chrysler Voyager - numbers P04727535AB. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit Chrysler Voyager
The gearbox control unit receives signals from the sensors and decides when and how gears are changed. The unit on offer comes from a Chrysler Voyager, engine 2.8 Crd, year 2004 and is used, working and in good condition.
Numbers to compare
- P04727535AB - Chrysler number (OEM)
Fitment
Compare the number P04686707AK in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model and year alone.
Signs of a faulty gearbox control unit
- the gearbox does not respond to a change of driving mode,
- you feel jerks or slipping when pulling away,
- the car enters limp mode and stays in one gear,
- the gearbox gets stuck in one gear.
Remember that rough gearbox operation can also be caused by worn oil or mechanical damage, so it is worth running diagnostics first.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| How do I check whether the control unit will fit my car? |
| Compare the model, year and the numbers on the unit fitted in your car with the numbers in the description. You can also send us a photo. |
| Why does the number have several spellings? |
| The same number on the housing can be written with spaces or as one string. We give both forms so it is easier to find. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.