A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit Jeep Grand Cherokee P04727535AF
Vendors's code: P04727535AF
Product code: 68C5-81505
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the control unit with number P04727535AF fit your car?
This is a used, working automatic gearbox control unit for the Jeep Grand Cherokee - numbers P04727535AF. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit Jeep Grand Cherokee
The gearbox control unit manages gear changes based on data from the car. We offer a used unit for the Jeep Grand Cherokee, engine 2.8 Crd, working and in good condition.
Numbers to compare
- P04727535AF - Chrysler number (OEM)
Fitment
The number CFC348F.15 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty gearbox control unit
- a gearbox fault message appears,
- the diagnostic tool stores power supply or communication faults for the unit,
- gear changes are jerky,
- the selected gear indicator does not work properly.
Before you buy, check the gearbox oil level and condition, the power supply, earths and connectors - sensors, solenoid valves or damaged wiring can give similar symptoms.
Questions and answers
| What condition is this control unit in? |
|---|
| It is a used, working control unit in good condition, covered by a 6-month warranty. |
| What should I check on delivery? |
| Check that the numbers on the unit match the description and that the connector and housing show no visible damage. |
| Which number matters most for fitment? |
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.