A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit Mercedes W220 2205450532
Vendors's code: 2205450532
Product code: B1C2-43455
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Gearbox control unit with number 2205450532 - is it the right part?
This is a used, working automatic gearbox control unit for the Mercedes W220 - numbers 220 545 05 32 / 2205450532. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit Mercedes W220
The gearbox control unit receives signals from the sensors and decides when and how gears are changed. The unit on offer comes from a Mercedes W220, engine 3.2 and is used, working and in good condition.
Numbers to compare
- 220 545 05 32 / 2205450532 - manufacturer number
Fitment
Compare the number 0 260 002 359 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty gearbox control unit
- the diagnostic tool stores power supply or communication faults for the unit,
- the selected gear indicator does not work properly,
- you feel jerks or slipping when pulling away,
- solenoid valve or communication faults appear in diagnostics.
Before you buy, check the gearbox oil level and condition, the power supply, earths and connectors - sensors, solenoid valves or damaged wiring can give similar symptoms.
Questions and answers
| Can a control unit with a different number fit too? |
|---|
| Sometimes, but we do not assume listings are interchangeable. Compare all numbers with the label on your unit or ask us. |
| Do you also sell solenoid valves or the complete gearbox? |
| This listing covers the control unit only. You will find other gearbox parts in the other categories of the shop. |
| Is the control unit new? |
| The control unit is used but working. It comes with a 6-month warranty. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.