A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit Opel Omega A Bosch 0260002166 96016011ZA
Vendors's code: 0260002166
Product code: 46D8-13454
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Gearbox control unit with number 0260002166 - is it the right part?
This is a used, working automatic gearbox control unit for the Opel Omega A - numbers 0 260 002 166 / 0260002166; 96 016 011 ZA / 96016011ZA. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit Opel Omega A
If the gearbox in your Opel Omega A, engine 2.0, year 1986-2003 reports faults, this listing may help. We sell a used, working control unit in good condition.
Numbers to compare
- 0 260 002 166 / 0260002166 - Bosch number
- 96 016 011 ZA / 96016011ZA - GM number
Fitment
The number CFC209F.01 also appears in another listing. Compare all numbers with the label on your unit - we do not assume listings are interchangeable.
Signs of a faulty gearbox control unit
- the gearbox warning light is on in the dashboard,
- a gearbox fault message appears,
- the unit cannot be read with a diagnostic tool,
- a gearbox failure message appears after switching on the ignition.
Reading the fault codes with a diagnostic tool helps tell a control unit fault from a failure of sensors, solenoid valves or the gearbox itself.
Questions and answers
| Does the gearbox control unit need coding after replacement? |
|---|
| Often yes - it depends on the make and version of the car. In many cars a used unit needs coding or adaptation with a diagnostic tool in a workshop. |
| Do you also sell solenoid valves or the complete gearbox? |
| This listing covers the control unit only. You will find other gearbox parts in the other categories of the shop. |
| Why does the number have several spellings? |
| The same number on the housing can be written with spaces or as one string. We give both forms so it is easier to find. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part fits.