A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Automatic gearbox control unit Opel Omega Bosch 0260002025 96014826XC
Vendors's code: 0260002025
Product code: 0DAA-347F8
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to choose a gearbox control unit for the Opel Omega?
This is a used, working automatic gearbox control unit for the Opel Omega - numbers 0 260 002 025 / 0260002025; 96 014 826 XC / 96014826XC. Before buying, compare the numbers with the label on the unit in your car.
Automatic gearbox control unit Opel Omega
The gearbox control unit receives signals from the sensors and decides when and how gears are changed. The unit on offer comes from a Opel Omega, engine 2.4 and is used, working and in good condition.
Numbers to compare
- 0 260 002 025 / 0260002025 - Bosch number
- 96 014 826 XC / 96014826XC - GM number
Fitment
Our range also includes other gearbox control units for this model with different numbers. Go by the number on the label, not just the model and year.
Signs of a faulty gearbox control unit
- the gearbox warning light goes off and on for no clear reason,
- gear changes are jerky,
- you feel jerks or slipping when pulling away,
- the car will not move in D or R.
Before buying, make sure the cause is not the gearbox oil, the power supply or a sensor, and only then replace the control unit.
Questions and answers
| Does the gearbox control unit need coding after replacement? |
|---|
| Often yes - it depends on the make and version of the car. In many cars a used unit needs coding or adaptation with a diagnostic tool in a workshop. |
| What does "used, working" mean? |
| We sell it as a used part, working and in good condition, with a 6-month warranty. |
| Do you also sell solenoid valves or the complete gearbox? |
| This listing covers the control unit only. You will find other gearbox parts in the other categories of the shop. |
Write to contact@auto24parts.com with the model, year and the number on your unit - we will check the fit.