Vendors's code: 55570807
Product code: 0281015767
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Tested Bosch ECU 0281015767 with Opel part number 55570807 for selected Astra and Zafira 1.9 CDTI models, supplied with a warranty and fast shipping.
The engine control unit with part number 0281015767 is used in selected versions of the Opel Astra and Opel Zafira 1.9 CDTI. Before ordering, compare both the Bosch and GM numbers with the unit installed in the vehicle.
The safest option is to choose an ECU with the same 55570807 part number as the original unit. Matching numbers reduce the risk of compatibility issues involving the vehicle electronics, engine software or communication system.
Engine control units used in 1.9 CDTI vehicles may look similar, but they can differ in part numbers, software and application. For this product, the most important references are 0281015767 and 55570807, not only the vehicle model.
In most cases, the Opel Astra and Zafira 1.9 CDTI engine ECU requires adaptation, coding or transfer of the immobiliser data. The exact procedure depends on the vehicle equipment and the installation method selected by the workshop.
Read the numbers printed on the original engine control unit and compare them with the product details. If the housing shows 55570807 or the Bosch number 0 281 015 767, this may be the correct replacement unit.
Yes, this engine control unit is used in selected versions of the Opel Astra and Opel Zafira equipped with the 1.9 CDTI engine. Final compatibility should always be confirmed using the part numbers, especially 0281015767 and 55570807.
Choosing an engine control unit by its part number is more accurate than relying only on the vehicle name. For an Opel 1.9 CDTI ECU, matching the references helps prevent ordering errors and makes installation easier for the workshop.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
