A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
BSI comfort module Opel Vectra C Signum GM 13206759 HG 5DK008669-52
Vendors's code: 13206759
Product code: 13206759HG
Barcode:
Code 39:
ISBN:
$81.96
Price
$81.96
$100.82
Price
$100.82
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
BSI comfort module Opel Vectra C Signum GM 13206759 HG 5DK008669-52
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.24
-
shipping
(Poland)
from
$30.24
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Body electronics module GM 13206759 - matching by Hella markings
BSI module Opel GM 13206759 marked Hella 5DK 008 669-52 is part of the car's electronic equipment and handles selected body functions. This module is version HG with hardware markings SW 0812 / HW 0017.
Choose the module by part numbers! Before buying, compare 13206759, 5DK008669-52 and the HG marking with your original unit. Send a photo of the label to Auto24Parts if you need help checking compatibility.
Opel body electronics - GM module 13206759
GM module 13206759 with the manufacturer marking Hella 5DK 008 669-52 is one of the electronic components used in the car's body wiring.
Units of this kind work together with the vehicle's other modules and take part in handling selected electrical functions. The exact scope depends on the application and configuration of the car.
Version HG and markings SW 0812 and HW 0017
When choosing a replacement module, not only the GM number 13206759 matters, but also the HG marking and the Hella number 5DK008669-52.
The label also shows SW 0812 and HW 0017. They can help identify the right version of the electronics.
Modules with a similar-looking housing and connectors are not always interchangeable. Check the markings of the original part before buying.
Electrical problems - when should you check the module?
A malfunction of the body electronics can show up as disturbances in selected electrical consumers, communication errors or problems with the functions handled by the module.
Before replacing it, check the fuses, power supply, earth wires and the condition of the connectors. Similar symptoms can also come from damaged wiring.
Fitting and configuring a replacement module
After replacing body electronics, coding, equipment configuration or an adaptation procedure with a suitable diagnostic tool may be required.
The work needed depends on the car and the version of the module fitted. We recommend confirming that the numbers match and that programming is possible beforehand.
FAQ - GM 13206759 Hella 5DK008669-52
1. Which numbers identify this Opel module?
The key markings are GM number 13206759, Hella number 5DK 008 669-52 and version HG.
2. Does the HG marking matter when choosing?
Yes. It is an additional module version marking that is worth comparing with the original part before buying.
3. Can a module with a different GM number be used?
Interchangeability has to be confirmed. An identical appearance does not guarantee hardware and software compatibility.
4. Is programming needed after fitting module 13206759?
Depending on the car's configuration, coding or adaptation of the module to the vehicle's equipment may be required.
5. How do I check compatibility before ordering?
Compare GM number 13206759, Hella number 5DK008669-52 and version HG with the label of your old module. If in doubt, send a photo to Auto24Parts.
Need module GM 13206759? Check that the markings match and order the right part from Auto24Parts. We help identify car electronics and offer worldwide shipping.
