A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Climate control panel Saab 9-5 5048384 A069800
Vendors's code: 5048384
Product code: 9595-7274B
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the panel with number 5048384 fit your car?
This is a used, working climate control panel for the Saab 9-5 - numbers 50-48-384 / 5048384; A069800. Before buying, compare the numbers with the label on the panel in your car.
Climate control panel Saab 9-5
The panel in this listing controls heating and ventilation in: Saab 9-5 (1998-2010). It is used, working and in good technical condition.
Numbers to compare
- 50-48-384 / 5048384 - part number
- A069800 - additional part number
Application according to the listing
- Saab 9-5 - model
- 1998-2010 - year
What the panel does
The panel collects the driver's settings - temperature, blower speed and airflow direction - and sends them to the heating and ventilation system. When it fails, the car ignores setting changes.
Fitment
We also offer other panels for this model with different numbers. Choose by the number on the label, not by the model and year alone.
Signs of a faulty panel
- no button backlight,
- pressing a button gives a click but nothing happens,
- the panel does not respond after switching the ignition off and on,
- the blower does not switch off or on.
Before buying, make sure the cause is not the power supply or wiring, and only then replace the panel.
Questions and answers
| Does the panel need coding after replacement? |
|---|
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Do you also sell air flap motors? |
| This listing covers the panel only. Other system parts are in the other shop categories, or ask us about availability. |
| Does the panel have the same buttons and display as mine? |
| Compare the look and number of buttons with the original in your car - the same model came with different panel versions. If in doubt, send us a photo. |
Not sure? Write to contact@auto24parts.com and we will help you choose the panel for your car.