A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Combination switch Citroen C2 C3 96608838XT 12275015
Vendors's code: 96608838XT
Product code: E904-30579
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does combination switch 96608838XT fit your car?
This is a used, working combination switch for the Citroen C2 C3. Numbers: 96608838XT / 12275015. Compare them with the part in your car before buying.
Combination switch Citroen C2 C3 96608838XT 12275015
The unit was removed from the Citroen C2 C3 (2006). It is a used part, working and in good condition.
Questions and answers
| What warranty do I get? |
|---|
| We give a 6-month warranty on this part. |
| Where do I find the number on the switch? |
| It is usually on the housing or a sticker, visible once the switch is removed. |
Donor car
- Citroen C2 C3 - model
- 2006 - year
Part numbers in the listing
- 96608838XT (96608838 XT) - OEM number
- 12275015 - additional number
The number decides, not the model: check 96608838XT on the housing of your part.
What it does
The stalks of a combination switch operate the indicators, main beam and wipers, so one fault can disable several functions at once.
Signs of a fault
- the stalk is loose or sticks,
- the indicator does not cancel,
- the main beam does not switch,
- functions work intermittently.
Before replacing the switch, rule out the fuse and a damaged wire.
Send a photo of your switch to contact@auto24parts.com and we will confirm whether this part fits.