Skip to main content
In English +48 792 797 344 Polski +48 501 409 435 +48 32 201 72 96 En Español +34 63 727 27 85 contact@auto24parts.com
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Wishlist
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Comfort control module Audi A8 S8 0000551586 4E0907279K
  • Part Type Comfort control module
  • Vehicle Make and Model Audi A8 S8
  • Manufacturer Temic
  • Manufacturer Part Number 0000551586
  • OEM Part Number 4E0 907 279 K / 4E0907279K
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Temic
with VAT without VAT
Price €100.00
PLN GBP EUR USD
Availability:
In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price

PRODUCT DETAILS

  • Part Type Comfort control module
  • Vehicle Make and Model Audi A8 S8
  • Manufacturer Temic
  • Manufacturer Part Number 0000551586
  • OEM Part Number 4E0 907 279 K / 4E0907279K
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Is Audi A8 S8 the right part for your car?

Used, working part: comfort control module for Audi A8 S8 - numbers 0000551586; 4E0 907 279 K / 4E0907279K. Compare the numbers with the label of the part currently in your car.

Go to full description

Comfort control module Audi A8 S8

The part in this listing handles body electronics in: Audi A8 S8. Choose it by the numbers on the list. It is used, working and in good condition.

What a fault looks like

  • electric windows respond with a delay or not at all,
  • the central locking or locking signal does not work,
  • communication errors appear on the dashboard,
  • interior lights or indicators work incorrectly.

Before buying, make sure the cause is not the power supply or wiring, and only then replace the module.

Function in the car

The module collects the driver's commands and distributes power to individual body circuits, so many small functions in the car depend on it.

Part markings

  • 0000551586 - part number
  • 4E0 907 279 K / 4E0907279K - VAG group number (OEM)

Matching by numbers

Compare number 0000551586 in full with the number on your part. Different versions were fitted to the same models, so the number decides, not the model alone.

Which car it is for

  • Audi A8 S8 - model
  • Temic - manufacturer

Questions before buying

Can a part with a different number fit as well?
Sometimes it can, but we do not assume that listings are interchangeable. Compare all numbers with the label on your part or ask us.
Is the part new?
It is a used, working part in good condition. Warranty details are listed in the offer features.

Write to contact@auto24parts.com with the model, year and the number from your part - we will check the fitment.

Latest Articles
See All

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more

  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more

  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more

  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more

  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more

  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more