A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Cylinder head Opel Astra Corsa 1.3 CDTI Z13DTH 55209068
Vendors's code: 55209068
Product code: 55209068
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Cylinder head 55209068 – how to confirm the fit?
Cylinder head, number 55209068, application: Opel Astra Corsa 1.3 CDTI Z13DTH. The part is used, working and in good condition. The safest way to match it is by the number on the label or housing.
Cylinder head Opel Astra Corsa 1.3 CDTI Z13DTH 55209068
The cylinder head 55209068 is a part used in Opel Astra Corsa 1.3 CDTI Z13DTH. The part is used, working and in good condition. Shipping or personal collection is available. The offer includes a 6-month warranty.
Markings to compare
- 55209068 – OEM number
Vehicle fitment
- make and model: Opel Astra Corsa
- engine: 1.3 CDTI Z13DTH
One car model may have used different versions of this part, so the number matters most.
How this part works
On diesel engines the injectors and glow plugs are mounted in the cylinder head.
When a replacement may be needed
It is worth checking the part when:
- coolant is lost with no visible leak,
- the engine overheats,
- a compression test shows a drop on one cylinder.
Fitting – what to watch out for
Always use a new head gasket and, if the manufacturer requires it, new head bolts. After fitting, set the timing, refill the fluids and bleed the cooling system.
Before you order – FAQ
| Can I ask about the fit before ordering? |
|---|
| Yes. Send us the number of your part and your car details (VIN, engine code, year) and we will check the fit. |
| What condition is the part in? |
| The part is used, working and in good condition. The photos in the listing show the actual item. |
| Does the cylinder head need skimming before fitting? |
| Before fitting, check the flatness of the mating surface with a straight edge and feeler gauge. The measurement, not the engine mileage, decides whether skimming is needed. |
Looking for another part? Browse the Cylinder heads category or write to contact@auto24parts.com.