The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ECU Engine Controller ALFA ROMEO 0261204481 0046532910 46532810
Vendors's code: 0046532910
Product code: 5A28-528EC
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller ALFA ROMEO 0261204481 0046532910 46532810
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ecu engine controller Alfa Romeo 0261204481 / 0046532910 / 46532810
The 0261204481 / 0046532910 / 46532810 numbers indicate an Ecu engine controller for Alfa Romeo, available in locked or unlocked versions – convenient to match and install.
What is the Ecu engine controller Alfa Romeo 0261204481 / 0046532910 / 46532810?
It is an Ecu engine controller used in selected Alfa Romeo models. The references 0261204481, 0046532910 and 46532810 help match the correct controller to the vehicle.
What does the Ecu engine controller 0261204481 / 0046532910 do?
The controller marked 0261204481 and 0046532910 manages the engine, fuel dosing and communication with other vehicle modules.
Do the numbers 46532810, 0046532910 and 0261204481 need to match?
Yes — matching numbers such as 46532810, 0046532910 or 0261204481 is the safest way to avoid mistakes.
Is the Ecu engine controller 0261204481 / 0046532910 plug & play?
Not always. In many cases the controller requires programming or adaptation for a specific Alfa Romeo.
In which variants is the Ecu engine controller offered?
Two variants are available: locked and unlocked (ready for reprogramming). Check the description before purchasing.
Which Alfa Romeo models use 0261204481 / 0046532910 / 46532810?
The numbers 0261204481, 0046532910 and 46532810 were used in selected Alfa Romeo engines. The best method is to compare part numbers.
Why search using 46532810 or 0261204481?
Searching with numbers like 46532810 or 0261204481 helps quickly locate the correct Ecu engine controller without guessing by year or engine type.
