A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller AUDI 1.8 TFSI 06K907425A 5WA1200401
Vendors's code: 06K907425A
Product code: DEE6-87563
Barcode:
Code 39:
ISBN:
975,61 zł
Price
975,61 zł
Regular price:
975,61 zł
0%
1 200,00 zł
Price
1 200,00 zł
Regular price:
1 200,00 zł
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller AUDI 1.8 TFSI 06K907425A 5WA1200401
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller AUDI 1.8 TFSI 06K907425A 5WA1200401 – guaranteed fit by part number
Original engine controller for AUDI 1.8 TFSI (06K907425A, 5WA1200401) ensures full compatibility with the vehicle and quick, hassle-free installation.
Is the 06K907425A engine controller compatible with Audi A4 1.8 TFSI?
Yes, the Engine controller with numbers 06K907425A and 5WA1200401 is used, among others, in the Audi A4 with the 1.8 TFSI engine. It is a modern unit responsible for engine operation, so the most important factor is full number compatibility – this ensures smooth installation without issues.
Which models use ECU 5WA1200401 in Audi 1.8 TFSI?
The number 5WA1200401 together with 06K907425A appears mainly in newer Audi models with the 1.8 TFSI engine, such as Audi A4, as well as vehicles on the same platform (VW, Skoda, Seat). However, it is important to note that many controller versions exist in this group, so matching the exact number is crucial.
Does the 06K907425A computer require programming after installation in Audi A4 or Audi A5 1.8 TFSI?
Yes, in most cases the 06K907425A Engine controller (5WA1200401) requires adaptation after installation. Typically, this involves immobilizer matching or transferring data from the old ECU. Without this process, the vehicle may not start correctly.
How to check if ECU 5WA1200401 will fit my Audi 1.8 TFSI?
The best approach is to compare full part numbers: 06K907425A and 5WA1200401. Additionally, it is recommended to verify the VIN number or the designation of the old controller. This is the most reliable way to avoid purchase mistakes and ensure full compatibility.
What distinguishes the 06K907425A engine controller in Audi 1.8 TFSI?
The 06K907425A Engine controller is a modern ECU responsible for managing the operation of the TFSI engine – from fuel injection to boost control and emissions. It is used in newer engine generations and also allows software modifications such as chiptuning, which is popular in these units.
Customers Also Viewed
-
Price 1 200,00 złPrice 975,61 zł
