Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Audi A4 1.8 TFSI Siemens 06K907425A 5WA1200401

  • Part Type Engine control unit
  • Vehicle Make and Model Audi A4
  • Engine Type 1.8 TFSI
  • Manufacturer Siemens
  • Manufacturer Part Number 5WA1200401
  • OEM Part Number 06K 907 425 A / 06K907425A
  • Part Number 5WA1200401
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Continental
with VAT without VAT
Price €300.00
Availability:
product-availability-module In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Engine control unit
  • Vehicle Make and Model Audi A4
  • Engine Type 1.8 TFSI
  • Manufacturer Siemens
  • Manufacturer Part Number 5WA1200401
  • OEM Part Number 06K 907 425 A / 06K907425A
  • Part Number 5WA1200401
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

How do you check whether control unit 06K907425A will fit?

Used, working Siemens VDO engine control unit 5WA1200401 (VAG number 06K907425A) for petrol engines, for Audi A4 1.8 TFSI. Match it by the numbers on the housing – you choose the locked or unlocked version when ordering.

Go to full description

Engine control unit 5WA1200401 – Audi A4 1.8 TFSI

A failing control unit usually shows up as starting or running problems. A used, working unit 5WA1200401 (06K907425A) for petrol engines is one way to restore proper operation for Audi A4 1.8 TFSI.

Part numbers to compare

  • 5WA1200401 – Manufacturer part number (Siemens VDO)
  • 06K 907 425 A / 06K907425A – VAG group part number

You will find the numbers on a sticker or print on the control unit housing. 5WA1200401 is the manufacturer number (Siemens VDO), 06K907425A the VAG number; either one is enough for comparison.

When does an engine control unit start causing trouble?

If a petrol engine will not start, stalls or runs unevenly and diagnostics cannot reach the unit, the control unit is a suspect. Rule out power, grounds, coils and wiring first.

Locked or unlocked version?

A locked unit still carries the data and immobiliser of the previous car – it suits workshops that unlock, program and match the part themselves. We prepare an unlocked unit before dispatch (about 1–2 working days). Not every unlocking method is available for every unit – it depends on the number, software and immobiliser, so ask before buying if in doubt. Details: engine ECU preparation options.

Questions about this control unit

Is 5WA1200401 the same as 06K907425A?They are two numbers of the same part: 5WA1200401 was assigned by the manufacturer (Siemens VDO), while 06K907425A is the VAG group number. The housing usually shows both, and one of them is enough for comparison.
Does the control unit need coding after replacement?Usually yes – the unit works together with the immobiliser and the vehicle, so it often needs matching. A locked unit comes with the data of the previous car, an unlocked one is prepared by us before dispatch.
How do I know the control unit is the faulty part?Read the fault codes first and check the power supply, grounds, fuses and wiring. The unit is often fine and the problem lies in sensors or wiring.

Not sure about the number? Send a photo of the label to contact@auto24parts.com. More units are in the categories engine control units for Audi and engine control units.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more