Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine Controller FORD CC11-12A650-AC CC1112A650AC S180145002A
Vendors's code:
Product code: 9239-9751A
Barcode:
Code 39:
ISBN:
€365.85
Price
€365.85
without VAT
Regular price:
€365.85
-0%
€450.00
Price
€450.00
Regular price:
€450.00
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine Controller FORD CC11-12A650-AC CC1112A650AC S180145002A
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What is the Ecu engine controller CC11-12A650-AC in Ford vehicles?
The Ecu engine controller CC11-12A650-AC is a component, that is responsible for correct and stable engine operation in Ford vehicles. It controls engine operation during start-up and everyday driving, ensuring smooth performance and driving comfort.
What role does the Ecu engine controller CC1112A650AC play?
The Ecu engine controller CC1112A650AC manages the operation of the power unit based on information transmitted from various vehicle components. Thanks to it, the engine responds correctly to the accelerator and runs evenly in different road conditions.
Do the numbers CC11-12A650-AC and CC1112A650AC refer to the same controller?
Yes, the designations CC11-12A650-AC and CC1112A650AC refer to the same Ecu engine controller. The difference in notation results only from the form of marking, while the application remains identical.
What is the purpose of the Ecu engine controller S180145002A?
The Ecu engine controller S180145002A is responsible for coordinating engine operation in Ford vehicles. It ensures stable operation of the power unit and correct vehicle behavior while driving.
Are the numbers CC11-12A650-AC and S180145002A related?
Yes, the designations CC11-12A650-AC and S180145002A refer to the same Ecu engine controller. Different numbers come from the manufacturer and the brand, but concern the same part.
Is the Ecu engine controller CC1112A650AC available in different variants?
Yes, the Ecu engine controller CC1112A650AC is available in two variants: locked and unlocked. Before choosing the appropriate version, it is worth reading the variant descriptions, to match the controller to a specific vehicle.
Why is the Ecu engine controller number S180145002A important?
The number S180145002A allows precise matching of the Ecu engine controller to the correct Ford vehicle version. Part number compatibility is the key to proper operation and trouble-free installation.
