Vendors's code: 2S7A12A650AGB
Product code: 2S7A12A650AGB
Barcode:
Code 39:
ISBN:
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Tested ECU engine controller for Ford Mondeo 2.0, part numbers 2S7A12A650AGB and 3UDA, with warranty and fast delivery straight to your door.
The number 2S7A12A650AGB is the original Ford catalogue code assigned to the engine controller fitted in the Ford Mondeo with the 2.0 petrol engine. The 2S7A prefix indicates the vehicle platform and model year, while the AGB suffix identifies the specific revision of the ECU module for this engine variant.
The code 3UDA supplements the 2S7A12A650AGB designation and specifies the software version together with the calibration set dedicated to the Ford Mondeo 2.0. Before ordering, check that both numbers — 2S7A12A650AGB and 3UDA — are identical to those on your original controller.
The engine controller 2S7A12A650AGB 3UDA was designed specifically for the third-generation Ford Mondeo equipped with the 2.0 petrol engine. The ECU module is precisely calibrated to the parameters of this particular Duratec unit, ensuring optimal interaction between the electronics and the powertrain.
Although the module 3UDA / 2S7A12A650AGB may physically fit other Mondeo variants, differences in software and calibration could prevent correct operation. That is why it is vital that both numbers — 2S7A12A650AGB and 3UDA — match the original controller installed in your vehicle.
A faulty engine controller 2S7A12A650AGB 3UDA in the Ford Mondeo 2.0 most commonly presents as hesitation during acceleration, rpm fluctuations at constant speed or the vehicle suddenly entering limp mode with reduced engine power. Difficulty hot-starting the engine is another frequent sign.
A defective ECU module 3UDA often generates fault codes related to the air-flow sensor or camshaft position sensors even though the sensors themselves are in good order. Every controller 2S7A12A650AGB in our store has been thoroughly tested and is dispatched with a warranty.
In most cases, replacing the engine controller 3UDA / 2S7A12A650AGB in a Ford Mondeo 2.0 requires a key-to-immobiliser synchronisation procedure via the PATS (Passive Anti-Theft System). Without this step the engine will not start, as the Ford security system will not recognise the new ECU module.
The best tool for programming the controller 2S7A12A650AGB / 3UDA is Ford IDS diagnostics or compatible software with an interface that supports Ford communication protocols. We recommend having this carried out by a professional workshop.
In the third-generation Ford Mondeo the engine controller 2S7A12A650AGB 3UDA is typically mounted in the engine bay, close to the bulkhead separating the engine from the passenger cabin. The ECU module sits in a housing designed to protect it from moisture and vibration.
Before removing the controller 3UDA / 2S7A12A650AGB it is advisable to disconnect the battery and wait a few minutes to allow the capacitors in the electronic circuits to discharge. This makes the swap safe for both the technician and the Ford Mondeo's on-board electronics.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
